Dryden Aqua enters the pool-market in Asia
Dryden Aqua has joined the SPLASH ASIA (pool show) in Singapore. Everything in Singapore is impressive: The skyline, the hotels, the technology, the architecture. Everything is big and of a high quality - the best of the best; everything but the pool water treatment! We were shocked to see the low standards of pool water treatment - even in the best hotels.
At night, you should not be able to see a beam of light shining through the water. If you can see the light beam this means there are small particles of dead bacteria and bits of bacteria in the water. Especially for children and women there is a high risk of catching serious diseases, eye and ear infections. According to medical doctors in Singapore many women are affected by gynaecological infections. Clearly this is not acceptable; definitely not for a society like the Singaporians who are proud to be the quality leaders in the region.
Case Study: AQUA NATURA Benidorm, Spain
We are very proud to present you a real succes story with ACO.
See how easily you can decrease your chlorine consumption and increase your water quality:
Dryden Aqua honoured at the "Golden Wave" Awards in 2015
Real innovations enrich the market sustainably. For this reason the magazine "Swimming Pool + Sauna" (www.schwimmbad.de), Europe’s largest Pool & Spa magazine with more than 40 years of tradition, awards every two years pioneering developments in pool and spa technology with the "Golden Wave".
The main focus of this award is the practical benefit of the excellent products - ensured by the jury of renowned and experienced professional pool contractors. Nearly 100 products were in the contest this year.
In seven of the eight categories, the magazine awarded a "Golden Wave“ as well as two awards. An award in the category "Water Care & Chemicals" went this year to Dryden Aqua for "ACO".
ACO is a highly innovative, ecofriendly product that disinfects water by amplifying the natural disinfection power
of the sun. ACO also protects chlorine from sunlight and UV. ACO is especially effective in outdoor pools.
ACO has 3 main features:
- Oxidation catalyst: ACO is a catalyst that amplifies the natural disinfection power of the sun. ACO can be combined with any conventional oxidizing agent (chlorine, bromine, peroxide). Sun in combination with ACO will make your water sparkling clear.
- Chlorine stabilizer: ACO protects chlorine and bromine from photo oxidation. The half-time of chlorine increases by a factor of 4 – 5 and the chlorine demand will be reduced by 30 %. By using ACO as a chlorine stabilizer the effectiveness of chlorine will not be decreased like with cyanuric acid. With ACO the opposite happens: oxidation improves because free radicals are formed in this process.
- Peroxide booster: ACO supports the disinfection power of hydrogen peroxide and thereby ensures crystal clear water.
Case Study: NoPhos and algae control
See the difference after 5 Weeks!
Move your Mouse over the Picture
Algae and bacteria require phosphate as a micronutrient, remove the phosphate and it becomes very difficult for algae and bacterium to survive.
Most algaecides are toxic, such as quaternary ammonium chemicals and copper based products. NoPhos is not an algaecide; it does not work by killing the algae. Instead NoPhos removes the phosphate from the water, and slowly the algae and even bacterium starve and will s to lowly disappear. The process is not quick, depending upon water temperature; it will take at least 6 weeks. However it is a solution to the problem as opposed to a toxic camouflage provided by algaecides.
When an algaecide such as a copper based product is used, the copper will kill the algae. The algae cell walls will leek and release organic phosphate as well as other nutrients back into the water. After a few days, the copper will be chelated, oxides will form and the copper will precipitate out of solution. As the copper concentration drops, algae and bacteria will start to grow again. Bacteria grow much quicker than algae, so an algae problem is temporarily solved by using toxic chemicals which results in a bacterium bloom that could be more pathogenic. The use of algaecide is not environmental or functionally sensible, nor is it safe, a much better solution is NoPhos.
NoPhos will remove phosphate from the water; 10ml of NoPhos will remove 1g of phosphate. If you have a water feature with 50m3 of water at a concentration of 0.4mg/l of phosphate, this equates with 50,000 x 0.4 =20,000mg or 20g of phosphate. In order to remove the phosphate from the water add 20 x 10ml = 200ml of NoPhos.
NoPhos will remove all of the dissolved phosphate from solution, but as algae and bacteria die, they release their contents including organic phosphate back into the water. It is therefore important that there is always some NoPhos in solution in order to grab this phosphate to prevent it from being used to grow more bacteria and algae. The life span of algae is around 6 weeks, so you need to keep adding manually small amounts of NoPhos every weekor continuously using a small peristaltic doing pump. Gradually the algae will disappear and you will be left with clean clear water.
A small amount of phosphate will continue to be introduced to the water from birds, or from leaves or other plant material entering the system. NoPhos addition should continue at a low level that maintains zero (<0.05mg/l) phosphate is solution. In addition to NoPhos, simple phosphate test kits are available from Dryden Aqua that permits detection of low concentrations of phosphate.
There is a Legionella risk from biofilm in fountains or any water feature that generates an aerosol. DryOx chlorine dioxide is very effective cleaning agent that removes biofilm to reduce the Legionella risk. NoPhos then prevents the biofilm and algae from returning.